Making the campus sustainable and environmentally friendly is a significant focus for our Buildings & Grounds team. As part of this effort, they worked with our janitorial vendor, DTZ, to change all of the trash bags on campus to the greenest bags currently available, making Simmons the first and only college in the area to take this step.

The new bags, provided by Revolution Bag, contain up to 95% post-consumer recycled content, a stark contrast to the bags used previously, which contained only 10% pre-consumer recycled content. Each bag is made of resin that was once used in irrigation tubes for farming. The same company that makes the tubes then collects them, recycles them, and manufacturers new bags from the recycled materials. This process creates a closed loop, leaving behind no materials used in the original manufacturing process.

In addition to being an environmentally conscious product, the bags are also stronger and more durable, making them safer for our janitorial staff to handle. Another added benefit is cost savings: the new bags are less expensive and Simmons will use fewer throughout the year.

This is just one step in an ongoing effort to reduce waste and shrink our environmental impact across campus. To find out more about sustainability efforts at Simmons, visit Green Simmons. If you’re interested in getting involved or sharing new ideas for greening the campus, contact Sara Smith.

Earlier this summer, the Simmons College Police Department was awarded state Certification from the Massachusetts Police Accreditation Commission. The Commission honored Chief Sean Collins and members of the department for their commitment to a set of more than 160 established standards and policies that guide professionalism and delivery of police services to their constituents.

The Simmons Police Department joins an elite group of law enforcement agencies in Massachusetts, only 22% of which have certification or accreditation. Taking this step promotes accountability and provides independent, external validation of their policies and procedures.

Certification is a self-initiated process focused on policy development, emergency response planning, training, and communications. These skill sets are an integral part of the team’s dedication to the safety and security of everyone on campus.

In addition, this effort reinforces the department’s commitment to professionalism and transparency in service to the Simmons community, and reflects the important role the department plays in the Simmons experience.

When searching for a real-world scenario to use in a class project, sometimes the best option is just across campus. That was the case during the Spring 2015 semester for students in Professor Gerry Benoit’s Systems Analysis in Information Services course.

Throughout the semester, students worked with members of the Technology department to conduct an analysis of our current identity management platform and make suggestions for a more efficient solution.

Dave Bruce, Senior Director of Technology Services, asked the students to focus on identity management because it is an integral component of our infrastructure that integrates with many of the services we support. Identity management presented the students with a complex system that required both a detailed investigation of processes and a macro-level understanding of functionality.

Professor Benoit guided students throughout the semester as they conducted a professional-level analysis. Students were divided into groups, each handling a different aspect of the project. This approach mirrored what they will encounter in professional settings, where the ability to work with other teams to achieve results is as important as individual contributions.

The students researched and studied the system, worked with the Technology to gather requirements, and created prototypes, leading to the development of a portfolio of their research, findings, and recommendations.

As computing and information science change rapidly, Professor Benoit noted that it is vital that students across a range of technical and business disciplines have a deep understanding of systems and user needs so that they are “able to participate in the larger discourse about how to use computing to fulfill real-world information needs.”

That objective was evident in the project itself. A student in the class added that computing courses often “focus on teaching you how technology is supposed to work in a perfect world where no one makes mistakes. This class really helped me understand how to anticipate and navigate pitfalls in a live project.”

In this one project, it is easy to see the value of collaboration in fostering innovation at Simmons. Our students, faculty, and staff bring a wealth of knowledge to campus. Creating opportunities to share that knowledge directly contributes to the long-term success of the College.

As Professor Benoit pointed out, “the idea that collaboration is possible on campus is brilliant and wonderful!” We couldn’t agree more.

Recently, Simmons Technology received an innovative donation from our printer vendor, Toshiba—a park bench that uses recycled and compressed ink cartridges instead of wood.

The bench is the result of a partnership between Toshiba and a recycling program called Close the Loop. This initiative takes empty cartridges and other disposable parts and reuses the material to make 100% recycled products.

For example, the park bench slats are made from compressed recycled plastic, called eLumber, that is waterproof, insect-proof, and UV retardant. In 2013, more than 170 tons of plastic from cartridges was recycled and used to construct benches, fencing, and other outdoor products.

As part of our ongoing printing initiative, Technology will continue to recycle all materials used in our multi-function devices and send them back to Toshiba for reuse in new products.

If you’d like to see (and try out) the new bench, it’s located in the seating area just outside of Lefavour Hall (near the Kotzen Room).

Remember that GoToMeeting offers Simmons faculty and staff the ability to schedule, host, and attend meetings with up to 25 participants.

If you’re using a Simmons computer, the software is already installed. You can also download and install GoToMeeting on a personal computer or mobile device.

Get started by visiting gotomeeting.com and signing in with your Simmons email. If it’s your first time logging in, enter your full Simmons email ([email protected]) and click “Forgot your password?” You’ll receive an email with a password reset link, which you can use to create a new password.

In addition to meetings, faculty can use GoToMeeting to record course content, host virtual office hours, invite remote guest lecturers to your class, and more.

If you need help using GoToMeeting, check out our FAQ or visit the support center, where you’ll find answers to common questions as well as step-by-step video tutorials. For other questions, please contact the Service Desk at 617-521-2222.

To coincide with the appointment of Debra Orr to the position of Associate Vice President of Administration, we’ll be unveiling a combined Technology and Administrative Services newsletter in August.

The newsletter will serve as a unified source for technology and administration topics that will be of interest and use to our community. We will continue to share updates about important improvements to campus services, along with topical news from the larger world of computing.

In addition, we hope to share even more stories highlighting the ways in which Simmons students, faculty, and staff are incorporating technology and administrative services into their teaching and learning at the College.

You’ve probably heard about 3D printers, but you may not have had an opportunity to see or use one in person. Simmons Technology would like to change that.

On May 14th and 15th, from 8am-12pm, we’ll be holding demonstrations of our new MakerBot Replicator printer in L225.

We encourage you to stop by if you’re interested in using 3D printing in the classroom, or if you’re simply curious about how 3D printers work and what they can do. Our team will be on hand to provide an overview and to answer any questions you have about modeling and creating objects using 3D printing.

Following the initial rollout of new printers across campus, Technology is preparing to activate ID card readers for faculty and staff. The card readers will provide access to all of the new multi-function devices (MFDs) on campus using your Simmons ID card. You’ll be able to print, copy, and scan quickly and securely from any MFD on campus by tapping your ID card on the reader.

This change provides faculty and staff with the same flexibility that CampusPrint provides to students: a networked, campuswide solution that allows you to get your documents when and where you need them.

In addition, networked MFDs with ID card access help to create efficiencies and to conserve resources by separating black & white and color print jobs, and by defaulting to double-sided printing.

As the ID card readers are activated for faculty and staff, Technology will be providing training to ensure that you have the resources you need. Project manager Roy Balcom will coordinate training sessions with each department, as needed. If you have questions about scheduling a training, please contact him at[email protected].

Over the past year, there has been an uptick in the frequency of so-called imposter scams. These attempts to obtain personal information involve emails and/or phone calls from a scammer who claims to be contacting you on “official” business. These scams often involve direct threats and they can be very convincing. Click the image below to see a full list of the tactics most often employed so you can be prepared.

If you ever suspect that someone is attempting to scam you via your Simmons email address or phone number, please contact the Service Desk immediately at 617-521-2222. For more information about imposter scams and what you can do to protect yourself, see this guide from the Federal Trade Commission.

On April 15th, Technology rolled out new antivirus software to all Simmons-owned computers. The new product—called ESET Antivirus—replaces Kaspersky Antivirus, and provides an effective, sustainable solution to keeping your computer safe from viruses and malware.

If you use a desktop or laptop computer on campus, this change should have occurred automatically and your computer should now be running ESET Antivirus.

If you’re an off-campus user of a Simmons-owned laptop, you’ll need to connect it to a wired connection on campus or to the Simmons Secure WiFi network. You should receive a prompt to start this process within one hour of connecting your laptop to the network. It’s important that you bring your laptop to campus and connect to the network as soon as possible. After April 30th, Kaspersky antivirus protection will no longer receive updates and your laptop may not be secure.

As always, to help keep your personally-owned computers safe, Technology recommends several free antivirus programs for Macs and PCs. Please visit servicedesk.simmons.edu/antivirus for more information.